SPEC

Parts Name

instax SHARE SP-2

instax SHARE SP-2instax SHARE SP-2
  • 胶片出口
  • 胶片剩余张数LED
  • 电池剩余电量LED
  • 电源按钮
  • 重新打印按钮
  • USB连接器盖
  • 后盖锁
  • 后盖锁
  • 电池盖

instax SHARE SP-3

instax SHARE SP3 SQinstax SHARE SP3 SQ
  • Battery remaining LED
  • Film remaining LED
  • Print exit
  • POWER button
  • USB connector cover
  • USB connector
  • Back cover lock
  • REPRINT button
  • Battery cover
  • Back cover

Color Variation

instax SHARE SP2

SilverSilver

GoldGold

instax SHARE SP3 SQ

WhiteWhite

BlackBlack

产品规格

instax SHARE SP2

记录方式
带有OLED的3色曝光
胶片
富士一次成像胶片 "INSTAX mini"(零售)
胶片容量
10张/盒
画面尺寸
62 mm x 46 mm
支持的图像尺寸
800 x 600 点
打印分辨率
320 dpi
打印等级
每色(RGB)256级
接口
 
符合标准:IEEE802.11b/g/n 
使用频率:2.4GHz(不支持5GHz)
支持的图像格式
JPEG, PNG
打印时间
从图像记录送到打印完成的时间约为10秒
打印容量
 
约100张(根据本公司测试条件)
* 因使用条件而异
电源
可充电电池NP-45S(1块)
充电时间
约90分钟(视电池剩余电量而异)
功率消耗
2W
操作温度
+5℃至+40℃(无结露)
尺寸
89.5 mm × 131.8 mm × 40 mm (不包括突起部位)
重量
250g(不包括电池和胶片盒)
随机附件
USB连接线(BOB711)

instax SHARE SP-3 SQ

Recording method
3-color exposure with OLED
Film
FUJIFILM Instant Film “instax SQUARE” (Purchased separately)
Photo capacity
10 prints/pack
Image size
62 mm×62 mm/2.4 in.×2.4 in.
Supported image size
800 x 600 dots
Printing resolution
12.5 dots/mm (318 dpi, 80 μm dot pitch)
Printing levels
256 levels per color (RGB)
Interface Standard compliance
 
Standard compliance: IEEE802.11b/g/n
Operation frequency: 2412 MHz to
2462 MHz (11 ch)
Supported image format
JPEG, PNG
 
Printing time
 
Image recording - photo output (fed out):
Approx. 13 sec.
Approximate
printing capacity
 
Approx. 160 prints
(Based on our test conditions)
* Varies depending on the conditions of use.
Power supply
NP-50 (1 piece)
Charging time
Approx. 3 hours (Varies depending on battery remaining level)
Power consumption
3W
Operating
temperature
+5°C to +40°C/+41°F to +104°F
(no condensation)
Dimensions
 
116 mm × 130.5 mm × 44.4 mm/4.6 in. ×
5.1 in. × 1.7 in. (excluding projections)
Weight
312 g/11 oz. (without battery and film pack)
Supplied accessory
USB cable (BOB711, Length: 1 m/3.3 ft.),ferrite core
*规格如有变更恕不另行通知* You can connect up to 8 devices to the printer. However, you cannot print an image from another device while printing is in progress.* The color of the photo may seem different from that displayed on your device.