open/close menu
Product Specifications
1. Camera Function
Image sensor
1/5-inch CMOS with primary color filter
Number of recorded pixels
2560 x 1920
Storage media
Internal memory, microSD/microSDHC memory card
Storage capacity
Approximately 45 images in internal memory, approximately 850 images per 1 GB in microSD/microSDHC memory card
Recording method
DCF compliant Exif Ver 2.3
Focus distance
f = 28 mm (35-mm film equivalent)
Aperture
F2.0
Auto focus
Single AF (with AF Illuminator)
Shooting distance
10 cm to ∞
Shutter speed
1/4 second to 1/8000 second (automatic switching)
Shooting sensitivity
ISO100 to 1600 (automatic switching)
Exposure control
Program AE
Exposure compensation
−2.0 EV to +2.0 EV (1/3 EV step)
Metering method
TTL 256 split metering, multi metering
White balance
Auto, Fine, Shade, Fluorescent 1, Fluorescent 2, Fluorescent 3, Incandescent
Flash
Auto flash / Forced flash / Suppressed flash Shooting range with flash: Approximately 50 cm to 1.5 m
Self-timer
Approximately 2 seconds / approximately 10 seconds
Image effects
10 lens effects, 10 film effects Total of 100 effects by multiplying above
2. Print function
Exposure Print pixel count
1600 x 600 dots (800 x 600 dots when printed from smartphone app)
Exposure resolution
25 dots / mm x 12.5 dots/ mm (635 x 318 dpi, 40 x 80 μm dot pitch) 12.5 dots / mm when printed from smartphone app (318 dpi, 80 μm dot pitch)
Interface
Standard compliance: Bluetooth Ver. 4.2 (BLE)
Exposure gradation
RGB gradation of 256 colors
Printable image format
JPEG images taken with this unit
Print output time
Approximately 16 seconds * Plus 7 seconds when printed using instax-Rich Mode immediately after startup.
Print function
Images in the internal memory and images in the memory card can be printed
Reprint
Reprint is possible for images stored in print history (up to 50)
3. Other
Smartphone app linked functions
Smartphone image print function, remote shooting function, printed image transfer function, firmware upgrade function
LCD screen
3.0-inch TFT color LCD screen Pixel count: Approximately 460,000 dots
External interface
Micro USB Micro-B (for charging only)
Power supply
Lithium ion battery (internal type: not removable)
Charging function
Built-in
Possible number of printed images
Approximately 100 (from full charge) * The number of prints depends on the usage conditions.
Charging time
Approximately 2 to 3 hours * Charging time depends on the temperature.
Main unit dimensions
87 mm x 122.9 mm x 36 mm (excluding projecting parts)
Main unit weight
Approximately 285 g
Operating environment
Temperature: 5℃ to 40℃ Humidity: 20% to 80% (no condensation)
Film used
FUJIFILM instant film "instax mini" (sold separately)
Declaration of conformity
FCC_Declaration of conformity_FI019 (mini EVO)
EU_Declaration of conformity_FI019 (mini EVO)
UK_Declaration of conformity_FI019 (mini EVO)
License
LZ4
QR-Code-generator
The instax prints depicted are for illustrative purposes only.
Please note that some specifications and appearance features may be changed without advance notice in order to improve the product.
Colors shown in catalog may differ slightly from the actual product due for printing reasons.
The text QR code is a registered trademark and wordmark of Denso Wave Incorporated.
The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJIFI LM Corporation is under license.
Pagetop